CCF General Specification Features- Unless specified, CCF will use the following specifications as our standard construction methods.

Frame:

  • Construction consists of a combination of kiln dried mixed hardwoods and engineered hardwood puzzle cut for added strength and durability.

  • Joint construction consists of dado or dowel joints glued together with high-solid poly vinyl adhesive and reinforced with corner blocks and screws at critical stress points.

  • Staples are coated and have a required minimum penetration of 1 ¼” for added strength.

  • Legs are rustproof metal, plastic or finished hardwood when required for aesthetics.

  • Exposed frames are standard beech or maple unless otherwise noted.

Seat deck:

  • Seat support system consists of 8 gauge regular loop sinuous wire springs attached with insulated clips. Two rows of insulated tie wires are attached to each spring with insulated clips.

  • Sofas and loveseats have double springs installed next to the arm to insure even weight distribution and added comfort.

  • Springs are separated from the seat cushion with a triple overlay consisting of a polyester nonwoven fabric over the springs, polyester fiber deck pad and polyester deck denim.

Seat cushions:

  • Seats are constructed with a 5 ½” 1.8 pound density, 36 Ild polyurethane core wrapped with 1”, 1.1 pound overlay top and bottom for maximum support, comfort and durability.

  • Seat cushions are designed to be reversible where possible, with the top side a mirror image of the bottom side for uniform wear ability.

  • All polyurethane filling materials meet California technical bulletin 117.

Inside back:

  • Inside back construction consists of 11 gauge sinuous arc springs secured to the frame with insulated clips for maximum comfort and strength.

  • One row of insulated tie wire is attached to each spring with insulated clips to insure uniform support for the back padding.

Arms:

  • Arms are wrapped and the front stump padded with 1.5 pound medium density polyurethane for increased comfort.

  • Outside arms and back are covered with heavy duty .085 gauge cardboard for added protection.

  • Outside surfaces are covered with polyester padding to protect the fabric from inner surfaces and to soften the outer surfaces for increased comfort.

Sleeper unit:

“Leggett & Platt Classic Series” The bed unit includes anti-tilt with closing safety device, lower section is reinforced with additional steel cross wires ------ 3 year warranty.

Mattress:

6” contract inner spring mattress is standard. The springs are 13-1/2 gauge heat tempered high carbon steel wire, 3-1/2” high, 4 turn banal coil. The insulator pad is hypo-allergenic and mildew resistant with a damask ticking cover. Meets Federal Flammability Standards CFR 1633 ------ 3 year warranty.

Options:

  • Moisture barrier

  • Cushion attachments

  • TB-133 flammability compliance

  • Stain repellent type fabric protector

  • High density polyurethane seat cushion

  • Down/feather cushion or wrap

  • Cartons (standard packaging heavy-duty bubble bag)

  • Extra heavy-duty sleeper unit

  • “Nirvana” cozy bed

  • Gel infused memory foam mattress